DIN-4G-AC 230V 4G LTE SMS Controller with Battery Backup
- Brand::Pacific GSM
- Product Code: DIN-4G-AC
- Availability: In Stock
| Power supply | 100 - 250 V AC / 50/60 Hz, device of protective class II. |
|---|---|
| Power consumption | approx 100mA, relays on, battery charging and 4G module transmits max. 500mA |
| Frequency bands | LTE (4G) B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B34/B38/B39/B40/B41/B66 |
| Input 1,2,3,4 | activated by GND connection or disconnection |
| Output 1,2 | NO/NC Relay, Max load 5 A / 250 V AC |
| Output 3,4 | transistor open collector for relay with max load 100 mA |
| Temperature sensor input 1,2 | max. connection length 5 m, measurement range -55 °C to 125 °C |
| Back up battery | Li-ion 3.7V/1100mAh |
| Typical backup time | 3 hours |
| Operating temperature range | -20 to +50 °C |
| Ingress protection class | IP20 |
| Dimensions (without the antenna) | 91 x 72 x 58 mm |
| In conformity with | EN 55032:2015 + A1:2020, class B EN 55035:2017 + A11:2020 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61000-4-2:2009 – criterion A EN IEC 61000-4-3:2020 – criterion A EN 61000-4-4:2012 – criterion A EN 61000-4-5:2014 + A1:2017 – criterion A EN 61000-4-6:2014 – criterion A EN IEC 61000-4-11:2020 – criterion A, B EN IEC 62368-1: 2020 + A11: 2020 |
Industrial 230V control with 4G LTE connectivity
The DIN-4G-AC is an industrial DIN-rail SMS controller for installations with a 100-250V AC supply. It combines 4G LTE communication, relay switching and built-in battery backup so essential monitoring and control can continue during a mains interruption.
Remote monitoring and switching
Use SMS commands or a phone call to switch connected equipment and receive alarm notifications. The controller is suited to lighting, pumps, gates, machinery and other electrical circuits that need dependable remote access. Four inputs can be activated by connecting or disconnecting to GND, while the relay outputs provide flexible control for mains-rated loads.
Power and communications
The unit operates from 100-250V AC at 50/60Hz and is a protective class II device. Typical consumption is approximately 100mA with relays on and battery charging; 4G module transmissions can reach a maximum of 500mA. LTE band support and the source configuration provide broad 4G network compatibility, and the battery backup helps preserve operation when primary power is unavailable.
Installation and programming
The enclosure is designed for DIN-rail installation. Configure the controller through the supplied USB software or by SMS, then connect the monitored inputs and controlled circuits to suit the application. The included manual and configuration software provide setup, wiring and operating guidance.
Key specifications
- Supply: 100-250V AC, 50/60Hz, protective class II
- Communication: 4G LTE with SMS and phone-call control
- Inputs: 1, 2, 3 and 4, activated by GND connection or disconnection
- Relay outputs: NO/NC, maximum 5A at 250V AC
- Consumption: approximately 100mA typical; up to 500mA during 4G transmission
- Mounting: DIN rail; built-in battery backup
Tags: 230V, AC, mains, industrial, DIN rail, 4G, LTE, SMS, controller, battery backup